Rating:
No votes cast
Hall Covered Bridge 45-13-07 #2
Facts
- Overview
- Lattice through truss bridge over Saxton's River on Hall Brige Rd
- Location
- Windham County, Vermont
- Status
- Open to one lane traffic with a weight limit
- History
- Built 1982 replicating the original 1867 bridge
- Builders
- - Milton Graton Associates
- Sanford Granger of Chesterfield, Cheshire, New Hampshire (Original bridge)
- Design
- Covered Town Lattice Bridge
- Dimensions
-
Length of largest span: 112.9 ft.
Total length: 122.1 ft.
Deck width: 11.5 ft.
Vertical clearance above deck: 11.5 ft.
- Also called
- Osgood Covered Bridge
- Approximate latitude, longitude
- +43.13738, -72.48736 (decimal degrees)
43°08'15" N, 72°29'14" W (degrees°minutes'seconds") - Approximate UTM coordinates
- 18/704348/4779135 (zone/easting/northing)
- Quadrangle map:
- Bellows Falls
- Inventory numbers
- WGCB 45-13-07 #2 (World Guide to Covered Bridges number)
BH 45772 (Bridgehunter.com ID)
Update Log
- April 13, 2018: New photos from Richard Doody
- February 17, 2017: New Street View added by Dana and Kay Klein
- July 30, 2010: Added by Brian McKee
Sources
- Brian McKee - bjmckee51 [at] yahoo [dot] com
- Jack Schmidt - jjturtle [at] earthlink [dot] net
- Dana and Kay Klein
- Richard Doody
© Copyright 2021, Historic Bridge Foundation and contributors.
This page's URL is http://bridgehunter.com/vt/windham/bh45772/
This page's URL is http://bridgehunter.com/vt/windham/bh45772/
The date is correct, this is a rebuilt one. The original 1867 bridge was destroyed by an overweight truck in 1980.
This is about as close as you could get to the original as possible though, it was built to the speicifications of the original by a local bridgewright Arnold Graton, who constructed his bridges in the exact fashion as they would have been historically (down to building them on the ground and dragging them into position by Oxen).