Beaver River Bridge
Source: Historic Bridge Inventory
BH Photo #324845
NBI reported date of 1923, but 1914 is listed in Historic Inventory. From the inventory: This bridge is located in close proximity to Rocky Ford Dam (Minersville Dam), and was built to USRC standards by the Delta land and Water Company
(owner of reservoir). This bridge is located in close proximity to the Minersville Dam. Research did not reveal an important and direct association to link the construction, individually, of this
bridge to serve the transportation needs of this reclamation project in Utah.
- Pony truss bridge over Beaver River on a county road
- Beaver County, Utah
- Open to traffic
- Built 1914
- Warren pony truss
Length of largest span: 60.0 ft.
Total length: 62.0 ft.
Deck width: 15.4 ft.
- Approximate latitude, longitude
- +38.25222, -112.78917 (decimal degrees)
38°15'08" N, 112°47'21" W (degrees°minutes'seconds")
- Approximate UTM coordinates
- 12/343449/4235313 (zone/easting/northing)
- Quadrangle map:
- Average daily traffic (as of 2010)
- Inventory number
- BH 33485 (Bridgehunter.com ID)
- Inspection report (as of March 2016)
- Overall condition: Poor
Superstructure condition rating: Satisfactory (6 out of 9)
Substructure condition rating: Poor (4 out of 9)
Deck condition rating: Satisfactory (6 out of 9)
Sufficiency rating: 26.9 (out of 100)
View more at BridgeReports.com
- February 7, 2018: New photos from Steve Conro
- May 20, 2015: New photos from Nathan Holth
- January 18, 2015: New Street View added by Steve Conro