Bridgehunter.com | Aquilla Creek Bridge

Share:

Photos

Aquilla Creek Bridge

Photo taken by C Hanchey in August 2009

Overview: Through truss bridge over Aquilla Creek on Rogers Hill Road
Location: McLennan County, Texas
Status: Bypassed by new bridge
History: Built 1892 by the Missouri Valley Bridge & Iron Works; bypassed by new bridge in 1998
Builder: - Missouri Valley Bridge & Iron Works of Leavenworth, Kansas
Design: Pin-connected, 7-panel Pratt through truss
Dimensions: Length of largest span: 110.9 ft.
Total length: 167.0 ft.
Deck width: 14.1 ft.
Approximate latitude, longitude: +31.74060, -97.20415 (decimal degrees)
31°44'26" N, 97°12'15" W (degrees°minutes'seconds")
Approximate UTM coordinates: 14/670115/3513086 (zone/easting/northing)
USGS topographic map: Gholson
Inventory numbers: TXNBI 091610AA0428002 (Texas bridge number on the National Bridge Inventory)
BH 42099 (Bridgehunter.com ID)
Inspection (as of 08/1990): Deck condition rating: Satisfactory (6 out of 9)
Superstructure condition rating: Poor (4 out of 9)
Substructure condition rating: Fair (5 out of 9)
Appraisal: Structurally deficient
Sufficiency rating: 13.6 (out of 100)
Average daily traffic (as of 1991): 150

February 16, 2013: New Street View added by Jared Mixson
August 17, 2009: Bridge is actually in McLennan County
August 15, 2009: Updated by C Hanchey: Bridge is open to pedestrians; added bridge builder