Aughwick Creek Bridge
Photo taken by Jodi Christman on 4/30/11
BH Photo #198641
FROM THE 1996-2001 PENNSYLVANIA HISTORIC BRIDGE SURVEY:
The three-span simply supported 146'-long, reinforced concrete T beam bridge was built in 1930 using the standard design for T beam bridges used by the state highway department from the late 1910s through the 1950s. It is supported on cutwater concrete piers and concrete abutments with wingwalls. It has a concrete deck and standard design concrete balustrades. T beams were used with great frequency throughout the state starting in the 1910s.
- Concrete tee beam bridge over Aughwick Creek on Pa 994
- Huntingdon County, Pennsylvania
- Open to traffic
- Built 1930; rehabilitated 1980
- - PennDOT Bridge Division
- York Engineering & Construction Co.
- Concrete tee beam
Length of largest span: 46.9 ft.
Total length: 146.0 ft.
Deck width: 29.9 ft.
- Approximate latitude, longitude
- +40.21222, -77.92528 (decimal degrees)
40°12'44" N, 77°55'31" W (degrees°minutes'seconds")
- Approximate UTM coordinates
- 18/251055/4455417 (zone/easting/northing)
- Quadrangle map:
- Inventory numbers
- PA 31 0994 0550 0000 (Pennsylvania Bridge Management System number)
PANBI 18759 (Pennsylvania BRKEY bridge number on the 2011 NBI)
BH 48725 (Bridgehunter.com ID)
- Inspection (as of 03/2008)
- Deck condition rating: Poor (4 out of 9)
Superstructure condition rating: Fair (5 out of 9)
Substructure condition rating: Fair (5 out of 9)
Appraisal: Structurally deficient
Sufficiency rating: 69.7 (out of 100)
- Average daily traffic (as of 2008)
- June 4, 2017: New Street View added by Dana and Kay Klein
- April 14, 2012: Updated by Jodi Christman: Added builder
- May 2, 2011: New photos from Jodi Christman
- May 1, 2011: Added by Jodi Christman