Rating:
2 votes

Jasper Bridge

Share:

Photos 

Jasper Bridge

Side elevation from the southwest

Photo taken by Mike Goff in July 2012

Enlarge

Map 

Street Views 

Facts 

Overview
Parker through truss bridge over Willamette River on HWY 222
Location
Jasper, Lane County, Oregon
Status
Open to traffic
History
Built 1952
Builder
- Glenn S. Paxson (Bridge Engineer)
Design
Two span Parker through truss with seven concrete t-beam approach spans.
Dimensions
Length of largest span: 200.0 ft.
Total length: 747.0 ft.
Deck width: 26.0 ft.
Vertical clearance above deck: 15.0 ft.
Recognition
Eligible for the National Register of Historic Places
Also called
Willamette River Bridge
Approximate latitude, longitude
+43.99833, -122.90583   (decimal degrees)
43°59'54" N, 122°54'21" W   (degrees°minutes'seconds")
Approximate UTM coordinates
10/507549/4871692 (zone/easting/northing)
Elevation
543 ft. above sea level
USGS topographic map
Jasper
Inventory numbers
04117A222 00520
OR 04117A (Oregon Dept. of Transportation structure number)
BH 30057 (Bridgehunter.com ID)
Inspection (as of 02/2012)
Deck condition rating: Satisfactory (6 out of 9)
Superstructure condition rating: Fair (5 out of 9)
Substructure condition rating: Satisfactory (6 out of 9)
Appraisal: Functionally obsolete
Sufficiency rating: 45.5 (out of 100)
Average daily traffic (as of 2010)
4,000

Update Log 

  • August 13, 2012: New photos from Mike Goff
  • December 13, 2010: New photos from Michael Goff
  • November 23, 2010: Updated by Nathan Holth: Added technical info.
  • April 22, 2010: New Street View added by Michael Goff
  • August 4, 2008: New photos from Michael Goff

Sources 

Comments 

Jasper Bridge
Posted November 23, 2010, by Todd D. Walker (mrwalk08 [at] aol [dot] com)

Oregan seems to be a "safe haven" for historic bridges. I hope the cutting torches and dynamite stays in places like Pennsylvania and Missouri where UCEBs are popping up.