Rating:
No votes cast
Ingram Slough Bridge
Share: 
Facts
- Overview
- Polygonal Warren pony truss bridge over Ingram Slough on E. Ingram Island Road
- Location
- Benton County, Oregon
- Status
- Open to traffic
- History
- Built 1963
- Design
- The Ingram Slough Bridge is a Polygonal Warren pony truss with verticals. This type of pony truss is used in other locations throughout Benton County and Oregon.
- Dimensions
-
Length of largest span: 100.1 ft.
Total length: 173.9 ft.
Deck width: 18.7 ft.
- Approximate latitude, longitude
- +44.31306, -123.23139 (decimal degrees)
44°18'47" N, 123°13'53" W (degrees°minutes'seconds") - Approximate UTM coordinates
- 10/481546/4906670 (zone/easting/northing)
- USGS topographic map
- Harrisburg
- Inventory numbers
- OR 14183 (Oregon Dept. of Transportation structure number)
BH 29840 (Bridgehunter.com ID) - Inspection (as of 04/2011)
- Deck condition rating: Satisfactory (6 out of 9)
Superstructure condition rating: Satisfactory (6 out of 9)
Substructure condition rating: Satisfactory (6 out of 9)
Appraisal: Functionally obsolete
Sufficiency rating: 65.5 (out of 100) - Average daily traffic (as of 2010)
- 469
© Copyright 2002-13, James Baughn and contributors.
This page's URL is http://bridgehunter.com/or/benton/14183000/
This page's URL is http://bridgehunter.com/or/benton/14183000/