Rating:
No votes cast

Yellowstone River Bridge

Photos 

From the river bank

North side of bridge looking SE

Photo taken by Clark Vance in Aug 2010

Enlarge

BH Photo #189502

Map 

Description 

This bridge was replaced in 2013.

Facts 

Overview
Girder bridge over Yellowstone River on Us 89
Location
Livingston, Park County, Montana
Status
Open to traffic
History
Built 1934
Design
Girder
Dimensions
Length of largest span: 113.9 ft.
Total length: 504.0 ft.
Deck width: 21.7 ft.
Approximate latitude, longitude
+45.67465, -110.53655   (decimal degrees)
45°40'29" N, 110°32'12" W   (degrees°minutes'seconds")
Approximate UTM coordinates
12/536096/5058004 (zone/easting/northing)
Quadrangle map:
Livingston
Land survey
T. 2 S., R. 10 E., Sec. 7
Elevation
4470 ft. above sea level
Average daily traffic (as of 2007)
2,820
Inventory number
BH 47198 (Bridgehunter.com ID)
Inspection report (as of May 2015)
Overall condition: Good
Superstructure condition rating: Good (7 out of 9)
Substructure condition rating: Good (7 out of 9)
Deck condition rating: Good (7 out of 9)
Sufficiency rating: 98.9 (out of 100)
View more at BridgeReports.com

Update Log 

  • December 1, 2010: Added by Clark Vance

Sources 

  • Clark Vance - cvance [at] dogmail [dot] com
  • David Jones - david2jpix [at] yahoo [dot] com

Comments 

Yellowstone River Bridge
Posted December 1, 2010, by Sheldon Wiens (sheldon_wiens77 [at] hotmail [dot] com)

Hey everyone,

My apology, but this won't relate to bridges. But I wanted to share with you all a map I created of how Aulne, Kansas will look like in the future hopefully. Aulne is a very small town that is close to Marion. It has a church, an old bank that was built in 1909, and it has about eleven houses. I've been through this little town very many times in my life. Ever since I was eight years old, my mind created an imagination about Aulne becoming a bigger city. On Google Maps, I created the map of my imagination in the future. Click on this link to view my map I created:

http://maps.google.com/maps/ms?ie=UTF8&hl=en&msa=0&msid=1041...