Rating:
No votes cast

Verdigris River Bridge

Map 

Street Views 

Facts 

Overview
Stringer bridge over Verdigris River on US 160
Location
Independence, Montgomery County, Kansas
Status
Open to traffic
History
Built 1960
Dimensions
Length of largest span: 170.0 ft.
Total length: 445.2 ft.
Deck width: 27.9 ft.
Approximate latitude, longitude
+37.22365, -95.67784   (decimal degrees)
37°13'25" N, 95°40'40" W   (degrees°minutes'seconds")
Approximate UTM coordinates
15/262412/4123042 (zone/easting/northing)
Quadrangle map:
Independence
Average daily traffic (as of 2016)
6,680
Inventory numbers
KDOT 0063-B0020 (Kansas Dept. of Transportation bridge number)
BH 46826 (Bridgehunter.com ID)
Inspection report (as of February 2017)
Overall condition: Fair
Superstructure condition rating: Good (7 out of 9)
Substructure condition rating: Satisfactory (6 out of 9)
Deck condition rating: Good (7 out of 9)
Sufficiency rating: 76.7 (out of 100)
View more at BridgeReports.com

Update Log 

  • November 9, 2010: Updated by Robert Elder: Added NBI Data - see comment below.
  • November 9, 2010: New Street View added by Sheldon
  • November 8, 2010: Added by Sheldon Wiens

Sources 

  • Sheldon Wiens
  • Robert Elder - robertelder1 [at] gmail [dot] com

Comments 

Verdigris River Bridge
Posted November 9, 2010, by Robert Elder (robertelder1 [at] gmail [dot] com)

The NBI is a good source for information on these bridges. I will explain the process for finding this.

1. On the bridge page, click "Try to find in NBI"

2. Look through the results

3. If you think you have found the right bridge, click "Import" and this will show you a map of the bridge location. Just be aware, that the map is not always correct.

4. You now have three choices to import the bridge. Click on the appropriate choice and then click on "Continue".

5. In this particular instance, the bridge already existed on the site, so the widget brought up a list of bridges in Montgomery County, KS. I found the right one. (You can view the bridges individually if you are not certain if you have the right bridge - in this case the right Verdigris River Bridge).

6. Click "Continue"

7. Verify that the information is correct to the best of your knowledge.

8. Click "Save changes"

The NBI data is now added. You can use the same process to add a bridge to this website through the NBI.

Verdigris River Bridge
Posted November 9, 2010, by Sheldon (sheldon_wiens77 [at] hotmail [dot] com)

I'd really like to know all the information on this bridge.